Lab
DC10 ADDS and DNS and iscsi target
HYP1 member Hyper V Installed
HYP2 Member Hype V INstalled
This is My lab
I have install Failover Cluster (Feature) on HYP1 Member, While testing the Failover Configuration I got warning about Report about NETWORK.
Validate Network Communication
Description:Validate that servers can communicate, with acceptable latency, on all networks.
Analyzing connectivity results ...
Node HYP2.tmt.com is reachable from node HYP1.tmt.com by multiple communication paths, but one or more of these paths experienced more than 10% packet loss.
Following are the connectivity checks made using UDP on port 3343 from network interfaces on node HYP1.tmt.com to network interfaces on node HYP2.tmt.com
Result | Source Interface Name | Source IP Address | Destination Interface Name | Destination IP Address | Same Cluster Network | Packet Loss (%) |
Success | HYP1.tmt.com - Ethernet | 192.168.3.4 | HYP2.tmt.com - Ethernet | 192.168.3.5 | True | 0 |
Success | HYP1.tmt.com - Ethernet | 192.168.3.4 | HYP2.tmt.com - vEthernet (Realtek PCIe GBE Family Controller - Virtual Switch) | 192.168.2.5 | False | 97 |
Success | HYP1.tmt.com - vEthernet (Realtek PCIe GBE Family Controller - Virtual Switch) | 192.168.2.4 | HYP2.tmt.com - vEthernet (Realtek PCIe GBE Family Controller - Virtual Switch) | 192.168.2.5 | True | 0 |
Failure | HYP1.tmt.com - vEthernet (Realtek PCIe GBE Family Controller - Virtual Switch) | 192.168.2.4 | HYP2.tmt.com - Ethernet | 192.168.3.5 | False | 100 |
Node HYP1.tmt.com is reachable from node HYP2.tmt.com by multiple communication paths, but one or more of these paths experienced more than 10% packet loss.
Following are the connectivity checks made using UDP on port 3343 from network interfaces on node HYP2.tmt.com to network interfaces on node HYP1.tmt.com
Result | Source Interface Name | Source IP Address | Destination Interface Name | Destination IP Address | Same Cluster Network | Packet Loss (%) |
Success | HYP2.tmt.com - Ethernet | 192.168.3.5 | HYP1.tmt.com - Ethernet | 192.168.3.4 | True | 0 |
Success | HYP2.tmt.com - Ethernet | 192.168.3.5 | HYP1.tmt.com - vEthernet (Realtek PCIe GBE Family Controller - Virtual Switch) | 192.168.2.4 | False | 97 |
Success | HYP2.tmt.com - vEthernet (Realtek PCIe GBE Family Controller - Virtual Switch) | 192.168.2.5 | HYP1.tmt.com - vEthernet (Realtek PCIe GBE Family Controller - Virtual Switch) | 192.168.2.4 | True | 0 |
Failure | HYP2.tmt.com - vEthernet (Realtek PCIe GBE Family Controller - Virtual Switch) | 192.168.2.5 | HYP1.tmt.com - Ethernet | 192.168.3.4 | False | 100 |
Can any one tell me What is the Problem and How to solve it .
Thank You
sagarpdalvi