Network Metrics on HYPER-V 2012 R2 cluster nodes

Hello

I'll have an Hyper-V Cluster, it is configured with a  CSV, LIVE, and and management network.

When I ping from  inside a node to the same nodename, it returns me the CSV  IP address network.

Do you know the reason? It's correct that ?

I know that is related with network metrics, because I've manually set a low value (3), and it returns the right Ip. Should I change metric it in this way?

THIS is what it happens: (172.22.64.98 is the CSV network, not the host IP)

ping mycomputer

Pinging mycomputer.mydomain.com [172.22.64.98] with 32 bytes of dat
Reply from 172.22.64.98: bytes=32 time<1ms TTL=128
Reply from 172.22.64.98: bytes=32 time<1ms TTL=128
Reply from 172.22.64.98: bytes=32 time<1ms TTL=128
Reply from 172.22.64.98: bytes=32 time<1ms TTL=128

Ping statistics for 172.22.64.98:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms

And this is what IPCONFIG /ALL  Reports:

Ethernet adapter Mgmt:

   Connection-specific DNS Suffix  . :
   IPv4 Address. . . . . . . . . . . : 172.22.172.45
   Subnet Mask . . . . . . . . . . . : 255.255.255.128
   Default Gateway . . . . . . . . . : 172.22.172.126

Ethernet adapter CSV:

   Connection-specific DNS Suffix  . :
   IPv4 Address. . . . . . . . . . . : 172.22.64.98
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :

Ethernet adapter LiveM:

   Connection-specific DNS Suffix  . :
   IPv4 Address. . . . . . . . . . . : 172.22.95.29
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :

Thanks in advancce