I have a 2 node cluster and need to see if I set it up correctly:
server 2012
---------------------------------------------------
server1 nic1 IP 10.10.1.100 10gb public
server1 nic2 IP 10.10.1.200 10gb public
server1 IP 10.10.1.300 10gb ISCSI
server1 IP 10.10.1.400 10gb ISCSI
server1 IP 192.168.1.1 1gb heartbeat
-----------------------------------------------------
server2 nic1 IP 10.10.1.101 10gb public
server2 nic2 IP 10.10.1.201 10gb public
server2 IP 10.10.1.301 10gb ISCSI
server2 IP 10.10.1.401 10gb ISCSI
server2 IP 192.168.1.2 1gb heartbeat
-------------------------------------------------------
cluster IP 10.10.10.110
-------------------------------------------------------
fileserver IP 10.10.10.120
---------------------------------------------------
when I look at the cluster networks I get cluster network 1 (nic2 IP 10.10.1.201 ,nic2 IP 10.10.1.200 ) and for cluster network2 (192.168.1.2 1gb heartbeat,192.168.1.1 1gb heartbeat) ? this does not look right to me,I don't think I should see the heartbeat as cluster2 network in the failover cluster manager, yes everything is on the same vlan. does this look correct? any help would be appreciated.