CUA: One or more errors occurred while checking the status of Windows...
Cluster with 2 hosts 2012 R2Scheduled CAU fails with:CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of...
View Article8.3 Name Generation in Cluster
HiI have a Scale Out File Server based on Server 2012 which is used for storage for our Hyper-V VHDX's. We have two nodes in the Cluster and the underlying storage is a Dell PowerVault MD3220 (SAS).We...
View ArticleHyper-V 2008 R2 cluster down
Hello,We have a 3 node Hyper-V 2008 R2 failover cluster. Yesterday we had problems and all VM's on node 3 went down. At 17:00 the back-up starts of the VM's which are on CSV(with DPM 2010 and hardware...
View ArticleCannot clear "Current read-only" on pass through disk
This is not the end of the world, but it's very annoying so I'm hoping somebody can explain what's going on or perhaps suggest some additional troubleshooting.Here's the scenario: Server 2012 Core VM...
View ArticleCluster Updating Readiness Results
I am configuring Cluster-Aware Updating on a 5-node cluster. At this time I'm not enabling Self-Updating mode. Instead I'm going to use Remote-Updating mode. In the Cluster Aware Updating console I ran...
View ArticleLive Migration Fails to only 2 nodes in my 10 nodes cluster. quick migration...
Hi, I have a strange issue here, with my 12 Node Hyper-V 2012R2 Cluster, I can live Migrate Between All nodes except two.! Node 7 and Node 10I can quick Migrate to these Nodes, and Live migrate from...
View ArticleHow to make 2 Node File Cluster with SAS Disks
Hello,I cant fine any detailed, specific information and answer on this questionI have 2 Servers, Say HP, with 4 SAS disks each, 1 for OS (2012R2Data) and 3 available.I want to create fault tolerant...
View ArticleHost Agent Service critical - Paging file is too small for this operation to...
Hi all,at the moment I have the problem that some of my hosts get in the errorstate critical in VMM 2012 SP1. The error details in VMM are:Error (2912)An internal error has occurred trying to contact...
View ArticleSQL 2012 std Cluster/ W2012R2 on ESXi 5.1
As I was reading the posts it appear that ESXi 5.1 does support MSCS on W2012 server.We are trying to setup a SQL 212 cluster (not always on bc we don't have Enterprise license) on two vm hosts running...
View ArticleWindows 2012 Hyper-v Cluster Live Migration Failure
This is a fairly new deployment. When I first started having this issue, I foundhttp://support.microsoft.com/kb/2779204, which suggests that gpupdate /force will temporarily resolve the issue. That...
View ArticleMigrating single file server to failover cluster file server
Hi,Currently we have one file server which is our Domain controller also. File Server data stored in SAN storage lun. Users home folders also resides at file server.Now we want to create 2 node...
View ArticleNot able to control TCP/IP services through NLB of windows server 2008 R2
Hi,I am not able to stop/ break the TCP/IP connection, even after stopped the cluster node configured in NLB.Also able to see the TCP/IP connection while doing netstat though command prompt
View Articlehow to enable a failed ip address(?)
Windows Server 2008 R2we have a cluster for Exchange DAG with two ip address (one local the other remote). usually the local ip address is online and the remote ip address is not. this morning I found...
View ArticleUnable to repair the active directory objet for 'cluster name' with Windows...
Hi, I've a problem with a Windows Server Datacenter 2012 R2 cluster (4 Node), I can't repair the Cluster name. The Error Code is the following 0x800713b8 "The Cluster request is not valid for this...
View ArticleServer 2012 DataCenter and Server 2012 DataCenter R2 Clustering
We have a 2012 Datacenter Server in our network, we are introducing a 2012 Datacenter R2 server as well as a SAN and iscsi for clustering and high availability of Virtual servers. We are currently...
View ArticleSan failover, disk timeout, iscsi and mpio
HiI am testing san controller failover. It takes around 2 mins for the second controller to come online after the first has failed.There are some registry settings that can be configured to increase...
View ArticleThe Fibre Channel Platform Registration Service could not register the...
Hyper-V Cluster. HP StorageWorks 82E 8 Gb PCI-e Dual Port FC HBA.Each 15 minutes, eventlog register a warning. EventID: 2 Source:2 The Fibre Channel Platform Registration Service could not register the...
View ArticleServer 2012 Failover Cluster No Disks available / iSCSI
Hi All,I am testing out the Failover Clustering on Windows Server 2012 with hopes of winding up with a clustered File Server once I am done. I am starting with a single node in the cluster for testing...
View ArticleGetting Error: cluster ip address not added to tcpip properties
I have 2 2008 R2 physical servers on the same subnet and they have been using NLB for the past 1.5 years. We had a firewall issue and I took one of the servers out of the cluster to do testing, while...
View ArticleRandom Reboots
Hello, I am experiencing random reboots on random servers during the week at random time... I did some research and I am suspecting that the "automatic recovery for application health monitoring" is...
View Article