HA File Server Failing
Help! I'm trying to set up a file server cluster. Ran a validation and everything checks out. The cluster consists of two virtual machines attached to two iSCSI targets (storage LUN and disk witness...
View ArticleWinrm and URL Prefix
My company changed the default wsman URL Prefix for Winrm. As a consequence, we cannot access file shares on Failover Clustering. We get Event Error codes 142 and 49 under the Windows Remote Management...
View ArticleCSV Disk stuck in redirected access after CSV Disk failure
We have just had a CSV disk fail causing most of our VMs to go offline. The disk has since come back online on another node but is now stuck in redirected access and when I attempt to turn off...
View ArticleWindows Server 2003 Cluster service shows as failed
We have a cluster configuration for a software called LIVELINK.This has been working fine for very long (close to 5 years) and we did our usual monthly maintenance and now in the cluster administrator...
View ArticleServer 2008 Hyper-V Failover Cluster Error on Domain Controller Reboot
I am pretty new to Hyper-V virtual but I have 2 Hyper-V Clusters, each with 2 Nodes and a SAN, 1 Physical Domain Controller for failover cluster management and 1 virtual domain controller as backup....
View ArticleClik here to view.
Name Resolution Not Yet Available
HiWe have a Server 2012 2 Node Cluster, the purpose of the cluster is ot run the Scale Out File Server role and this role appears to be online and functioning normally.However we have an error on the...
View ArticleCSV running out of space
We have a 2012 Hyper-V Cluster with 4 nodes and 2 CSVs. Volume1 ran out of space last night and all the VMs on that Volume went into a paused state. I was sure I had plenty of space, but I extended...
View ArticleNLB on multiple VLAN
Hi,Due to a migration of networks and server upgrade (out with 2003, in 2012). The 2003 are on a VLAN different than the future production VLAN for 2012. The idea would be on the new 2012 box, to have...
View ArticleCluster resource Hang
Hi We have 3 Node Hyperv 2012 R2 Failover Cluster suddenly we face below error on one Node.A component on the server did not respond in a timely fashion. This caused the cluster resource 'Virtual...
View ArticleAdd Node on Cluster
Hiwe have 2 Node Hyper V 2012 R2 Failover Cluster . we are going to add third node on Cluster.Want to know is there any configuration changes required in Cluster or just add it . Quorum configuration...
View ArticleW2012 Failover Clustering Active-Active - Resource Control
Hi,I have heard others on this forum mention that you can do Active:Active clusters with FC in Windows 2012 ( and probably earlier versions). I understand that you need to create another cluster (...
View ArticleServer 2012R2 Cluster Storage Error
January 2014 I built 4 servers into a cluster for Hyper-V base VDI using a SAN for central storage. I have had no issues with the running of the setup until recently when the 4th server decided to stop...
View ArticleCluster VMs sometime fail while doing an export-vm
I'm using a powershell script to export some Clustered (2012 R2 Hyper-V) VMs through task scheduler. Every now and then a VM is restarted by cluster during the export-vm. The errors found from the...
View ArticleFailover cluster failed due to mysterious IP conflict ?
I'm having a mysterious problem with my Failover cluster,Cluster name: PrintCluster01.domain.com Members: PrintServer01.domain.com andPrintServer02.domain.comin the Failover Cluster Management –...
View ArticleHow to stop IPv6 flooding with DirectAccess NLB cluster on vsphere 5.5
I have a working DirectAccess (DA) NLB cluster in IGMP Multicast mode on vsphere 5.5. The external interface is IPv4 only (using IPHTTPS) but the internal interface is IPv4 and IPv6.For IPv4 resources...
View ArticleUnable to create cluster
Everything runs fine until :Network Name <Cluster Name>: Unable to read ObjectGUID parameter, error=2Network Name <Cluster Name>: Unable to read NetworkName parameter, error=2Then the...
View ArticleNetwork Load Balancing not working with UDP traffic (Server 2012)
Hi all,I manage an application that receives traffic from mobile devices on cellular networks. The traffic is UDP. I have set up two x Server 2012 VMs to form part of a NLB cluster. Each server has a...
View ArticleNetwork Metrics on HYPER-V 2012 R2 cluster nodes
HelloI'll have an Hyper-V Cluster, it is configured with a CSV, LIVE, and and management network.When I ping from inside a node to the same nodename, it returns me the CSV IP address network.Do you...
View ArticleClustering server 2012 and 2012 R2, DSM build missmatch
I am trying to cluster server 2012 and server 2012 RS for hyperv failover but validation fails on the MPIO check because 2012 is version 6.2 build 9200 and 2012 r2 is 6.3 build 9600. Can the newer...
View ArticleWindows Failover Clustering - Configure Generic Application (App: SilverShield)
Hi AllCurrently I have a failover clustering configured containing 2 disks and both onlineI'm in a process of testing failover with a specific app named SilverShield for SFTPI've added the app as...
View Article